Liberon Wax and Polish Remover

Liberon Wax and Polish Remover is easy to use and gets rid of old dulled wax deposits and everyday grime.

It will remove smoke stains, dirt and old wax and can be used on all interior wood such as beams, dado rails, banisters or doors, without harming the original finish or patina.  As such it is commonly used in antique furniture restoration.

Liberon Wax and Polish Remover should not raise the grain or lift veneers and can be used on the most delicate of surfaces. It is ideal for removing built-up layers of wax that may be causing a haze or bloom on the surface.  It can be used to remove wax final finishes from French polish, varnish, lacquer and oil.

To use, firstly make sure the work area is well ventilated.  Wear suitable heavy duty gloves and apply by soaking a pad of grade 0000 steel wool in Wax and Polish Remover, squeezing out any excess.  Gently wash the surface, working on a small area at a time, working in the direction of the grain if possible.  Leave to work for a few minutes then while the surface is still wet, remove the softened wax with a clean lint-free cloth.  Repeat this process until all old wax is removed.  Allow the surface to dry for 24 hours before re-finishing.

Precautions:  Heavy duty gloves should be worn when using this product.  Do not pour into plastic containers or attempt to use on plastic or vinyl surfaces.

Note that this product has the potential to damage newly applied French polishes, lacquers, varnishes and sealers so it is best to do a test patch in a discrete area to establish the final result.  This product cannot be used on water-based varnish.  

SPECIFICATIONS:

SAFETY DATA SHEET DOWNLOAD

Delivery Policy