Rustins Exterior Wood Oil - Restorate-5015332002153
Rustins Exterior Wood Oil - Restorate-5015332002153

Rustins Exterior Wood Oil

Sale price£13.27
£11.06 ex vat
  • Same Day Despatch until 4:30pm (Monday to Friday)
  • Next Working Day Delivery
  • Weekday Specialist Support
  • Free Delivery over £70
Size:500ml
Quantity:
How much do I need?:

How much do I need?

Length:
Width:

For , you will need
Surface type and application can vary coverage
Only 3 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
Low stock: 3 left

Rustins Exterior Wood Oil is a water-borne, quick drying blend of natural plant oils and unique ingredients to protect and enhance both exterior and interior solid wood and veneer.

It absorbs into the wood and dries to leave a water resistant hard wearing finish and contains additional UV filters to protect against sunlight damage.

Rustins Exterior Wood Oil is low odour and suitable for use on soft and hardwood and will bring out the natural colour and beauty of the timber. When dry it is suitable for use in food contact areas.

In preparation, ensure that the surface is clean, dry, smooth and free from any potential contaminants.  If the surface has been waxed then this can be taken off with a Wax and Polish Remover.  Paint or varnish can be taken off with a suitable remover.

Oak and softwoods can be prone to staining as moisture activates naturally occurring mould spores in the wood.  Therefore these timbers should first be treated with a wood preservative.

Apply a liberal first coat by brush and allow to dry without wiping.  Further coats can be applied by brush or cloth and any surplus oil wiped away after a few minutes.  Nibs can be removed by applying the initial coat of the oil with a scouring pad, rubbing in the direction of the grain.  Ideally this oil should be applied in temperatures between 15-25 degrees C.  Do not apply below 10 degrees or if rain is expected.  Wood will require re-oiling at least annually.  Horizontal surfaces and very exposed areas will need more frequent maintenance.  Before recoating, clean the surface with White Spirit, lightly sand and then re-apply the oil.

SAFETY DATA SHEET DOWNLOAD

PRODUCT DATA SHEET DOWNLOAD

SPECIFICATIONS:

Coverage (m²/L): 13
Size: 1L
Drying Time: 2-3 hours
Re-coat: 4 hours
No. of coats: 3
Size: 500ml, 1 litre
Clean up: Warm water and detergent