Rustins Quick Dry Outdoor Clear Varnish - Restorate-5015332710034
Rustins Quick Dry Outdoor Clear Varnish - Restorate-5015332711031
Rustins Quick Dry Outdoor Clear Varnish - Restorate-5015332710034

Rustins Quick Dry Outdoor Clear Varnish

Sale price£17.26
£14.38 ex vat
  • Same Day Despatch until 4:30pm (Monday to Friday)
  • Next Working Day Delivery
  • Weekday Specialist Support
  • Free Delivery over £70
Size:1 Litre
Only 4 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
Low stock: 4 left

Rustins Quick Drying Outdoor Clear Varnish is a water-based clear, non-yellowing varnish that dries quickly and is available in gloss or satin sheens.  It has minimal effect on the colour of the wood it is applied to.  Rustins Exterior Varnish contains UV and fungicidal protection, giving superior resistance against blistering, cracking and peeling.

It leaves a long lasting protective finish to external wood, which allows the natural wood grain to show through. It is suitable for use on window frames and doors, plus garden furniture, summer houses, conservatories and much more.  It can also be used to seal concrete.

In preparation, ensure that the surface is clean, dry, smooth, in sound condition and free from any potential contaminants.  Repair any large cracks, open joints or areas of damage with a good quality filler.  Oily or resinous woods should be washed with white spirit prior to varnishing.  If the wood is to be coloured then treat with Rustins Wood Dye before applying the varnish.

Apply liberally in the direction of the grain by brush.  On a hot day the first coat can be diluted up to 15% with water to aid adherence.  It may be necessary to lightly sand after the first coat if the grain is raised. 

Ideally the product should be applied in temperatures between 15-25°C. Do not apply below 10°C, in high humidity or if rain expected.  Also, avoid applying to hot surfaces or in strong sunlight.

It is likely that a re-coat will be necessary after 2-3 years.  When this is needed, clean the surface with a mild detergent and lightly sand to provide a key.

*  Stir well before use - satin sheens may dry glossy if the tin is not stirred thoroughly enough.


No. of coats: 3
Coverage: 12 -15 square metres per litre
Re-coat: 4 hours minimum (touch dry in 30 minutes)
Clean up: Water