Osmo UV Protection Oil Extra - Restorate-4006850757152
Osmo UV Protection Oil Extra - Restorate-4006850827756
Osmo UV Protection Oil Extra - Restorate-4006850757152
Osmo UV Protection Oil Extra - Restorate-4006850860791
Osmo UV Protection Oil Extra - Restorate-4006850860807
Osmo UV Protection Oil Extra - Restorate-4006850834617
Osmo UV Protection Oil Extra - Restorate-4006850770113
Osmo UV Protection Oil Extra - Restorate-4006850834464
Osmo UV Protection Oil Extra - Restorate-4006850770106

Osmo UV Protection Oil Extra

Sale price£1.55
£1.29 ex vat
Size:5ml Sample
Colour:Clear 420 Extra
How much do I need?:

How much do I need?


For , you will need
Surface type and application can vary coverage
Only 27 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
In Stock

Same Day Despatch : Order by 4:30pm Mon-Fri: Delivery & Returns

Osmo UV Protection Oil Extra - The original exterior UV Protection Oil!

Osmo UV Protection Oil Extra contains special clear ingredients which stop the sun's rays from ageing and greying your exterior wood without losing its natural beauty, colour or character. Based on natural oils, UV Protection Oil Extra will leave a microporous satin finish that is breathable so does not peel, flake or blister.  Swelling and shrinkage are reduced and the surface is left water repellent.

Osmo UV Protection Oil contains active ingredients which protect the surface from mould growth and algae or fungal attack.   If additional protection from blue stain, rot and insect infestation is required then the wood can be pre-treated with Osmo WR 4001 Base Coat.  If the wood has greyed it can be restored to it's original colour with Osmo Wood Reviver Power Gel prior to refinishing.

UV Protection Oil is suitable for use on all exterior vertical wooden surfaces such as doors, window frames and shutters, carports, cladding, fences and summer houses.

Prior to application make sure the wood is clean, dry and frost-free, with a moisture content no greater than 20%.  If applying to new wood, wood with a high natural moisture content or a particularly hard wood, it will need approximately six weeks weathering time so that the oil will properly adhere.  Remove any previous coatings such as paint or lacquer.  If sanding, do not use a grit finer than P120.  Apply thinly in the direction of the grain and spread well.  Allow to dry for at least 12 hours, then apply a second coat. 

Colour options:  Clear (420), Oak (425), Cedar (428), Natural (429)


No. of coats:
Drying time:
10-12 hours
Up to 18m² per litre
Brush or Microfibre roller
Clean up: Osmo Brush Cleaner and Thinner