Mirka LEROS 950XCV Dual Voltage & 1230M AFC 230V Deco Solution Kit - Restorate-6416868227116

Mirka LEROS 950XCV Dual Voltage & 1230M AFC 230V Deco Solution Kit

Sale price£1,808.65
£1,507.21 ex vat
  • Same Day Despatch until 4:30pm (Monday to Friday)
  • Next Working Day Delivery
  • Weekday Specialist Support
  • Free Delivery over £70
Out of Stock
Only 0 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
Out of Stock

An outstanding value outfit that includes Mirka's dual voltage LEROS wall and ceiling sander paired with the 1230 M AFC 230v dust extractor.  This combination will offer dust free sanding of walls and ceilings, dramatically reducing clean up time and promoting a much healthier working environment.

This kit includes:

1 x Mirka LEROS 950XCV Dual Voltage 225mm Orbit 5.0 with Bag

1 x Mirka Dust Extractor 1230 M AFC GB 230v

1 x Abranet 225mm Grip P80, 25/Pack

1 x Abranet 225mm Grip P120, 25/Pack

1 x Abranet 225mm Grip P180, 25/Pack

1 x Hose 27mm x 4m and Connector

Mirka code:  KIT2220EXMUK

The LEROS 950XCV sander has the convenience of dual voltage, meaning it can be used both with domestic 230/240v supplies and 110v site supplies.  It has been designed to be highly user-friendly in operation, weighing in at only 3.5kg.  The sanding head has 180° flexibility resulting in ergonomic working positions, so that the operator can work for longer periods without strain or fatigue.

A brushless motor ensures consistent performance even when under heavy load.  The design of the sanding head and backing pad allow the sander to work very close to corners and edges while offering god stability.  This will result in a smoother, higher quality finish.  The use of an interface pad is recommended with this sander to help produce a smoother result.

To keep the sander working at it's best it is prudent to replace the backing pad at the first signs of wear.  The life of the pad can be extended with the use of pad savers, which go between the backing pad and abrasive, absorbing the stress of aggressive sanding or frequent disc swapping.


Power input: 250w
Mains supply:  100-240v
Speed: 4000 - 8000rpm
Orbit: 5mm
Pad size: 225mm
Weight: 3.5kg
Noise level: 71dB


The 1230 M AFC dust extractor is capable of handling the medium hazard dust that is generated from sanding surfaces such as plaster, hardwood, MDF, concrete and brick.  This makes it suitable for use on work sites where a 230/240v supply is used a M-class is the minimum requirement under Health and Safety executive guidelines.

The extractor is equipped with an automatic filter cleaning system, which activates every 15 seconds to maintain performance levels and extend filter life.  An air-flow sensor will indicate if flow has dropped below optimum levels at which point the filter may need to be changed or the fleece dust bag may be full and need to be replaced.

Ease of transport is facilitated by onboard storage of the cable and hose with further storage space available on top of the machine.  Mirka's Case Fastening Accessory can be used to attach the Systainer site case for easy access to frequently needed items such as discs or pad savers.  The extractor can be converted for use as a normal vacuum cleaner with the addition of the Mirka Clean Up Kit.

The 1230 M is suitable for wet and dy use but the dust bag should be removed before wet use and a cleaning cycle carried out before and after wet use.


Power input: 1200w
Weight: 14.5kg
Noise level: 60dB
Filter cleaning: Automatic
Dust class: M
Work exposure limit: Greater than or equal to 0.1mg/m3
Filter leakage: Less than 0.1%
Filter efficiency: 99.9%
Dimensions: 565 x 385 x 565mm
Air flow volume: 4500 l/min
Vacuum: 250mbar
Tank volume: 30 litre