Mirka Dust Extractor 1230 M PC 110V with Hose - Restorate-6416868301373

Mirka Dust Extractor 1230 M PC 110V with Hose

Sale price£757.25
£631.04 ex vat
  • Same Day Despatch until 4:30pm (Monday to Friday)
  • Next Working Day Delivery
  • Weekday Specialist Support
  • Free Delivery over £70
Quantity:
Out of Stock
Only 2 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
Low stock: 2 left
This is a 110v version of the Mirka 1230M PC dust extractor, suitable for use with Mirka's range of 110v Orbital Sanders and intended for site use.  According to HSE guidelines, M-class filtration is the minimum requirement for most work sites as it will handle more hazardous dusts as might be generated by hardwoods, MDF, concrete and brick.  It is compatible with all of Mirka's 110v sanders including the Mirka DEROS, DEOS, DELTA and the dual voltage LEROS and LEROS-S.


Filter cleaning is done via a simple 'push and clean' system with spare filters available when needed.  An air-flow sensor will indicate when flow drops below the optimum level at which point the filter should be cleaned or replaced.


The 1230M has an auto start facility so it only runs while the sander is in operation.  This will reduce noise in the work space and extend the life of the motor.  Hose and cable storage is integrated for easier transportation and the flat top has further storage plus the ability to attach the Mirka Case Fastening Accessory.  This allows the Systainer site case to be securely attached for easy access to consumable items.


If the extractor needs to perform as a normal vacuum cleaner then this can be achieved by using the Mirka Clean Up Kit.  A fleece dust bag is included with a 5 pack of replacements available.






The WEL (Work Exposure Limit) is set by the Health and Safety Executive to define the amount of various substances that can be present in the air at the workplace.

Mirka code:  8999130111


SPECIFICATIONS:











Dust Class: M
Work Exposure Limit: Greater than or equal to 0.1mg/m3
Filter Leakage %: Less than 0.1%
Filter Efficiency: 99.9%
Tank Size: 30 litres
Dimensions:
565 x 385 x 565 mm
Noise Level: 59dB
Power Input: 1000w
Vacuum: 250 mbar
Volume Flow Air: 4500 litres/min