Mirka DEOS 663XCV Delta & 1230M PC 110V Deco Solution Kit - Restorate-

Mirka DEOS 663XCV Delta & 1230M PC 110V Deco Solution Kit

Sale price£1,197.52
£997.93 ex vat
  • Same Day Despatch until 4:30pm (Monday to Friday)
  • Next Working Day Delivery
  • Weekday Specialist Support
  • Free Delivery over £70
Quantity:
Out of Stock
Only 3 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
Low stock: 3 left

This outfit features the Mirka 663XCV Delta sander and 1230 M PC dust extractor, both in 110v format, making them suitable for use on work sites where the 110v input is commonly used.  The outfit has everything needed to start work immediately and consists of the following:

Mirka code:  KIT2218EXMUK

* Mirka 663XCV Delta 110v sander

* Mirka 1230 M PC 110v dust extractor

* 2 x Mirka Abranet Ace HD P80 (25 pcs)

* 2 x Mirka Abranet Ace HD P120 (25 pcs)

* 2 x Mirka Abranet P180 (50 pcs)

* Mirka 27mm x 4m anti-static hose

The sander's compact size (just 10cm high) and 'Delta' configuration allows it to excel at reaching into corners and hard to reach areas.  The multi-hole backing pad gives excellent dust extraction characteristics and a 3mm orbit allows for effective stock removal.  A brushless motor ensures that the sander will perform at it's best, even under heavy load.  

The layout of the controls and comfortable ergonomics combined with light weight permit long periods of use without fatigue.  Speed can be adjusted instantly via an easy to use lever and a separate on/off switch ensures safe and easy handling.

SPECIFICATIONS:

Power input: 250w
Speed: 5000 - 10000rpm
Orbit: 3mm
Pad size: 100 x 152 x 152mm
Weight: 970g
Noise level: 68dB


The 1230 M PC features M class filtration, making it suitable for medium hazard dust that can be generated by hardwood, MDF, concrete and brick.  According to Health and Safety Executive guidelines, an M class dust extractor is the minimum requirement for work site use.

In common with the other 1230 models, the 110v version has an auto start facility, so that it only runs while the sander is operating.  This will reduce noise in the work area and extend the life of the motor.

There is a manual push and clean system for filter cleaning.  An air-flow sensor will sound an alarm if the flow drops below optimum levels at which point the filter should be cleaned.  When a replacement is needed, spare filters are available.

There is integral storage for the cable and hose, while the flat top offers further storage.  It is also possible to fit the Systainer site case to the top via the Case Fastener Accessory.  This will give easy access to frequently needed consumables.

Should it be necessary for the 1230 to act as a standard vacuum cleaner then this can be achieved with the Mirka Clean Up Kit.  A disposable fleece dust bag is supplied with spares available in packs of 5.

The 1230 can be used wet or dry but the dust bag must be removed first.  Clean the filter both before and after wet use.

SPECIFICATIONS:

Power input: 1000w
Weight: 14.5kg
Noise level:  59dB
Filter cleaning: Push & Clean
Dust class: M
Work exposure limit: Greater than or equal to 0.1mg/m3
Filter leakage: Less than 0.1%
Filter efficiency: 99.9%
Dimensions: 565 x 385 x 565mm
Air flow volume: 4500 l/min
Vacuum: 250mbar
Tank volume: 30 litre