{"product_id":"osmo-led-smart-uv-curing-hard-wax-oil-5981-white","title":"Osmo LED Smart UV Curing Hard Wax Oil 5981 White","description":"\u003cp\u003eFor decades, professional wood finishers have accepted drying time as part of the job. Apply the finish. Wait for it to dry. Wait for it to cure. Then finally deliver, install or return the surface to service.\u003c\/p\u003e\n\u003cp\u003eOsmo LED Smart-Oil changes that.\u003c\/p\u003e\n\u003cp\u003eUsing Osmo's dedicated UV LED curing system, this revolutionary hardwax oil can be fully cured in seconds rather than days. For professional workshops and contractors, that means dramatically faster turnaround times, reduced storage requirements and the ability to complete projects that would previously have taken days in a single visit.\u003c\/p\u003e\n\u003cp\u003eOnce cured, LED Smart-Oil provides exceptional durability, water resistance and protection against everyday wear while retaining the natural appearance and feel of the timber. The low VOC formulation makes it particularly suitable for workshop and on-site use, while the food-safe and toy-safe finish ensures it is suitable for a wide range of commercial and residential applications.\u003c\/p\u003e\n\u003cp\u003eIf time is money, Osmo LED Smart-Oil could be one of the smartest investments a professional wood finisher can make.\u003c\/p\u003e\n\u003ch5\u003eSurface prep\u003c\/h5\u003e\n\u003cp\u003eProper preparation is essential to achieving an even colour, reliable curing and the best possible finish:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the timber is clean, dry and free from dust, grease, waxes, silicones and any other contaminants.\u003c\/li\u003e\n\u003cli\u003eCompletely remove any existing finishes, coatings, or surface treatments before application.\u003c\/li\u003e\n\u003cli\u003eSand the timber evenly using the appropriate abrasive sequence for the timber species and application. Sand to a P180 grit on most woods such as Pine, Oak, Beech. P120 for dense woods like Walnut, Mahogany and Cedar, and P80-100 (followed by a wipe of methylated spirits) for oily, super dense exotic woods like Teak and Iroko. This helps the oil absorb into the wood grain.\u003c\/li\u003e\n\u003cli\u003ePay particular attention to consistency when sanding, as uneven preparation can affect both colour uptake and the final appearance.\u003c\/li\u003e\n\u003cli\u003eThoroughly remove all sanding dust using a vacuum and lint-free cloth.\u003c\/li\u003e\n\u003cli\u003eInspect the surface carefully before application. Any contamination left on the timber may become visible once the finish is applied.\u003c\/li\u003e\n\u003cli\u003eAlways carry out a test application on a spare piece or inconspicuous area to check colour, compatibility, and final appearance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAs with all coloured wood finishes, the final result is heavily influenced by surface preparation and timber species. Taking the time to prepare properly will deliver the best possible finish.\u003c\/p\u003e\n\u003ch5\u003eHow to apply\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003ePrepare the timber as described in surface prep.\u003c\/li\u003e\n\u003cli\u003eStir the oil thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eApply a thin, even coat using a suitable applicator.\u003c\/li\u003e\n\u003cli\u003eCheck the surface for even coverage and remove any excess product before curing.\u003c\/li\u003e\n\u003cli\u003eCure immediately using a 395nm LED-UV lamp, holding the lamp 2-10cm above the surface and moving it steadily across the workpiece. We recommend Osmo's UV LED Smartlight Pro Lamp, which has been specifically developed for use with Smart-Oil.\u003c\/li\u003e\n\u003cli\u003eFor higher-wear surfaces, apply a second coat if required and cure as above.\u003c\/li\u003e\n\u003cli\u003eThe surface is ready for use immediately after curing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOsmo LED Smart-Oil is designed to be used with the dedicated Osmo UV LED Smartlight Pro Lamp. Alternative UV lamps, workshop lights or sunlight exposure will not provide reliable curing performance.\u003c\/p\u003e\n\u003ch5\u003eTop tips\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePreparation has a significant impact on both colour consistency and finish quality.\u003c\/li\u003e\n\u003cli\u003eApply thin, even coats for best results.\u003c\/li\u003e\n\u003cli\u003eOne coat is often sufficient for decorative and lower-wear surfaces such as panelling, shelving and cabinet carcasses.\u003c\/li\u003e\n\u003cli\u003eConsider a second coat for higher-wear applications such as floors, staircases, desktops and table tops.\u003c\/li\u003e\n\u003cli\u003eIf you prefer a matt appearance, consider finishing with Osmo Polyx-Oil after the initial Smart-Oil application.\u003c\/li\u003e\n\u003cli\u003eSome oily, dense and exotic timber species (including teak, mahogany, iroko, acacia, and ipe) require a coarser sanding grit and may require particularly thin application.\u003c\/li\u003e\n\u003cli\u003eAlways carry out a test application before starting work.\u003c\/li\u003e\n\u003cli\u003eGreen Oak is not recommended, as moisture levels are often above the maximum recommended for successful application.\u003c\/li\u003e\n\u003cli\u003eTimbers previously coated with varnish, lacquer or other surface finishes must be sanded back to bare wood before applying LED Smart-Oil.\u003c\/li\u003e\n\u003cli\u003eAvoid cleaning with antibacterial sprays, bleach-based cleaners, or aggressive chemical products, as these can prematurely degrade the finish.\u003c\/li\u003e\n\u003cli\u003eClean routinely using a damp cloth and a suitable wood floor or furniture cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eTechnical data \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cp\u003eDownload the \u003ca href=\"https:\/\/drive.google.com\/file\/d\/1i1q0lJrIafdzic7p6JYIBLu49dCKr-MW\/view?usp=drive_link\" title=\"Osmo LED Smart-Oil product data sheet\" rel=\"noopener\" target=\"_blank\"\u003eproduct data sheet\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSPECIFICATIONS\u003c\/h5\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ctable style=\"height: 74.3752px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 20.333%; height: 19.5938px;\"\u003e\u003cstrong\u003eNo. of coats:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.404%; height: 19.5938px;\"\u003e1 for Matt finish and low traffic surfaces, 2 for Satin finish and high traffic surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 20.333%; height: 19.5938px;\"\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.404%; height: 19.5938px;\"\u003eUp to 50m² per litre per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.5938px;\"\u003e\n\u003ctd style=\"width: 20.333%; height: 15.5938px;\"\u003e\u003cstrong\u003eDrying and Curing time:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.404%; height: 15.5938px;\"\u003e\u0026lt;15 seconds under Osmo UV LED Smartlight Pro Lamp \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 20.333%; height: 19.5938px;\"\u003e\u003cstrong\u003eClean up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.404%; height: 19.5938px;\"\u003eWater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"product-detail-description p pf-product-details-description\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Osmo","offers":[{"title":"125ml","offer_id":63736133878137,"sku":"OSM-LED5981-125","price":29.95,"currency_code":"GBP","in_stock":true},{"title":"750ml","offer_id":63736133910905,"sku":"OSM-LED5981-750","price":98.6,"currency_code":"GBP","in_stock":false},{"title":"2.5 Litre","offer_id":63736133943673,"sku":"OSM-LED5981-2500","price":234.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/8985\/7461\/files\/Osmo_LED_Smart-Oil_5981_125ml_2.jpg?v=1781701858","url":"https:\/\/restorate.co.uk\/products\/osmo-led-smart-uv-curing-hard-wax-oil-5981-white","provider":"Restorate","version":"1.0","type":"link"}