Fiddes Liming Wax - Restorate-5060147670271
Fiddes Liming Wax - Restorate-5060147671841

Fiddes Liming Wax

Trustpilot
£19.35
£16.13 ex vat
  • Same Day Despatch until 4:30pm (Monday to Friday)
  • Next Working Day Delivery
  • Weekday Specialist Support
  • Free Delivery over £70
Size:400ml
Quantity:
Out of Stock
Only 4 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
Low stock: 4 left

Fiddes Liming Wax is designed to give a white shade or to give a limed appearance to stained or bare wood. The deeper grained woods, such as Oak, will give more contrast in the grain as more wax is caught.  Fiddes Liming Wax will fill the pores of the wood to give a contrasting white tone, which will emphasise the grain over the whole surface.

Preparation:  Sand the wood in stages, beginning with P120 through to P180/240 grit,  working in the direction of the grain where possible.  Use a bronze liming brush to open the wood pores to make them more receptive to the wax.  It will also remove any remaining dust in the pores.  For a more resilient base for the wax you can apply a coat of Fiddes Shellac Sealer.

Application:  Apply liberally with a lint-free cloth, brush or sponge working well into the grain in a circular motion.  When the surface is covered, wipe lightly across the grain making sure the wax stays in the open pores.  Leave for 5-10 minutes then buff in the direction of the grain with a soft cotton cloth.  Finish with a coat of clear wax, such as Fiddes Supreme Light, which will protect the surface and enhance the sheen.

For a guide and comparison of our wax polishes, have a read of our blog, Wax Polishes, Which Should I Use?

SPECIFICATIONS:

No. of coats: 1-2
Coverage: 16 square metres per litre depending on substrate
Drying time: 3 minutes at room temperature

 

SAFETY DATA SHEET DOWNLOAD