Polyvine Stone and Brick Protector - Restorate-5030777001325
Polyvine Stone and Brick Protector - Restorate-5030777001332
Polyvine Stone and Brick Protector - Restorate-5030777001325

Polyvine Stone and Brick Protector

Sale price£24.68
£20.57 ex vat
  • Same Day Despatch until 4:30pm (Monday to Friday)
  • Next Working Day Delivery
  • Weekday Specialist Support
  • Free Delivery over £70
Size:1 Litre
Quantity:
Only 1 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
Low stock: 1 left

Polyvine Stone and Brick Protector is a high performance water-based product that is absorbed into porous surfaces and forms a barrier to water, moisture, grease, oil acid, alkali and salts.

It also suppresses mould and fungal growth and the formation of salts on natural masonry surfaces.  It is UV resistant and leaves a dead flat, natural finish.

Before use ensure that the surface is clean and free of grease or any other potential contaminants.  Mix the product well but do not shake and apply by brush, spray or roller.  For general use on masonry, brickwork and stone, one coat will usually be enough.  There is potential for a chemical reaction to take place if this product comes into contact with glass, lead or aluminium, so mask off such areas first.  If there is any contact rinse thoroughly with water immediately.

* Please note that this product should not be used in temperatures below 5°C or in very high humidity.

SPECIFICATIONS:

No. of coats: 1
Coverage: 15-20 square metres per litre (depending on substrate)
Drying time: 15 mins - 1 hour depending on temperature
Sizes: 1 litre / 4 litre
Clean up: Water

 

 

SAFETY DATA SHEET DOWNLOAD

PRODUCT DATA SHEET DOWNLOAD