Ronseal Diamond Hard Floor Paint - Restorate-5010214857548
Ronseal Diamond Hard Floor Paint - Restorate-5010214857562
Ronseal Diamond Hard Floor Paint - Restorate-5010214857548
Ronseal Diamond Hard Floor Paint - Restorate-5010214861095

Ronseal Diamond Hard Floor Paint

Sale price£23.98 Regular price£29.98
Save 20%
£19.98 ex vat
  • Same Day Despatch until 4:30pm (Monday to Friday)
  • Next Working Day Delivery
  • Weekday Specialist Support
  • Free Delivery over £70
Size:2.5 Litre
Colour:Tile Red
Quantity:
Only 1 Available, remaining will be back-ordered. Please contact us if part dispatch is required.
Low stock: 1 left

Ronseal Diamond Hard Floor Paint uses advanced paint technology to produce the ultimate paint protection for all wooden, concrete and stone floors.

The Ronseal Diamond Hard formula not only protects your wooden floor from household chemicals, including detergent, bleach, alcohol, grease and dirt but is also scratch, scuff and knock resistant.

The advanced quick drying formula enables Ronseal Diamond Hard Floor Paint to strongly adhere to your floor, leaving a super smooth, long lasting satin finish that resists flaking and peeling, and maintains it's appearance for much longer than standard floor paints.

Preparation and application: Ventilate well and make sure the working environment is above 10°C.  Leave newly laid concrete for a month to set and dry then use a wire brush to remove any dust.  Seal with a stabilising solution or with a coat of the paint diluted 10% with water - apply a thin coat then allow it to dry. Previously painted concrete or stone can be wire brushed to help the new paint adhere, then wipe down with White Spirit.

For wooden floors, sand with a 120 grit abrasive, remove the dust and wipe down with White Spirit.  Any holes can be treated with a 2 part wood filler and knots can be sealed with a knotting agent.  Stir thoroughly to mix the pigment fully and do a patch test to ascertain the colour.  The paint can be applied by brush, applicator pad or roller.

4-6 hours after the final coat the surface will be ready for light foot traffic and for furniture to be replaced.  After 72 hours the surface will have reached its full hardness and will be resistant to knocks, scuffs etc.

Available colours: Tile Red, Slate, White, Black

SPECIFICATIONS:

No. of coats: 3
Coverage: 12m2 per litre
Finish:
Satin
Drying time: 4-6 hours
Clean up: Water
Sizes: 2.5 litre, 5 litre (slate only)

 

SAFETY DATA SHEET DOWNLOAD